--- title: "Page TSconfig" manual: "Mail system" version: "3.12" permalink: "https://docs.typo3.org/permalink/mediaessenz/mail:page-ts-config@3.12" source: "Reference/PageTsConfig/Index.rst" rendered: "2026-11-03T08:22:20+00:00" --- # Page TSconfig {#page-ts-config} ## Frontend related (mail content) {#frontend-related-mail-content} This extension come with three static Page TSconfig files, which all can be found here: ```text EXT:mail/Configuration/TsConfig/Page ``` - `ContentElement/All.tsconfig` removes all not supported fluid_styled_content elements from the newContentElement wizard of TYPO3. - `BackendLayouts/Mail.tsconfig` adds a very simple one-column backend layout for mail content to the system. - `TCADefaults.tsconfig` contain some default pages settings which does not (for me) make sense in context of mails. ## Backend related (modules) {#backend-related-modules} All this MAIL configuration properties must be set in the Page TSconfig field of the MAIL sys-folder under the key `mod.web_modules.mail`. Most of these properties may conveniently be set using the [MAIL configuration module](https://docs.typo3.org/permalink/mediaessenz/mail:configure-default-settings@3.12). The following properties set default values for corresponding properties of mails and can (mostly) changed in the [settings step of the mail wizard](https://docs.typo3.org/permalink/mediaessenz/mail:mail-wizard-settings@3.12). **Properties** - **fromEmail** - *type:* string - *Default:* - *Path:* mod.web_modules.mail.fromEmail Default value for the 'From' or sender email address of mails. (Required) Note: This email address appears as the originating address or sender address in the mails received by the recipients. - **fromName** - *type:* string - *Default:* - *Path:* mod.web_modules.mail.fromName Default value for the 'From' or sender name address of mails. (Required) Note: This name appears as the name of the author or sender in the mails received by the recipients. - **replyToEmail** - *type:* string - *Default:* - *Path:* mod.web_modules.mail.replyToEmail Default value for 'Reply To' email address. Note: This is the email address to which replies to mails are sent. If not specified, the 'fromEmail' is used. - **replyToName** - *type:* string - *Default:* - *Path:* mod.web_modules.mail.replyToName Default value for 'Reply To' name. Note: This is the name of the 'Reply To' email address. If not specified, the 'fromName' is used. - **returnPath** - *type:* string - *Default:* - *Path:* mod.web_modules.mail.returnPath Default return path email address. Note: This is the address to which non-deliverable mails will be returned to. Note: If you put in the marker ###XID###, it'll be substituted with the unique id of the mail recipient. - **organisation** - *type:* string - *Default:* - *Path:* mod.web_modules.mail.organisation Name of the organization sending the mail. - **priority** - *type:* int+ - *Default:* 3 - *Path:* mod.web_modules.mail.priority Default priority of direct mails. Possible values are: 1 - High 3 - Normal 5 – Low - **hideExcludeRecipientGroups** - *type:* bool - *Default:* - *Path:* mod.web_modules.mail.hideExcludeRecipientGroups Hide the exclude recipient groups in the last mail wizard step. - **showSendingPriority** - *type:* bool - *Default:* - *Path:* mod.web_modules.mail.showSendingPriority Show the sending priority in the last mail wizard step. Mails marked as "high" will be send before other mails. - **defaultSendingPriority** - *type:* int+ - *Default:* - *Path:* mod.web_modules.mail.defaultSendingPriority Set the default sending priority for the last mail wizard step. Possible values are: 0 - Normal 1 - High ### sendOptions {#pagetsconfig-includemedia} - **sendOptions** - *type:* int+ - *Default:* 3 - *Path:* mod.web_modules.mail.sendOptions Default value for the format of email content. If in doubt, set it to 3 (Plain and HTML). The recipients are normally able to select their preferences anyway. Possible values are: 1 - Plain text only 2 - HTML only 3 - Plain and HTML - **includeMedia** - *type:* boolean - *Default:* - *Path:* mod.web_modules.mail.includeMedia If set, images will be embedded into the HTML mail content. Note: Sent messages will be much heavier to transport. Note: To prevent embedding of a specific image, add the attribute `data-do-not-embed` to the image tag. This can be useful for adding third party tracking. When this option is not set, images and media are included in HTML content by absolute reference (href) to their location on the site where they reside. - **htmlParams** - *type:* string - *Default:* - *Path:* mod.web_modules.mail.htmlParams Default value for additional URL parameters used to fetch the HTML content from a TYPO3 page. Note: The specified parameters will be added to the URL used to fetch the HTML content of the mail from a TYPO3 page. If in doubt, leave it blank. - **plainParams** - *type:* string - *Default:* &plain=1 - *Path:* mod.web_modules.mail.plainParams Default value for additional URL parameters used to fetch the plain text content from a TYPO3 page. Note: The specified parameters will be added to the URL used to fetch the plain text content of the mail from a TYPO3 page. The default `&plain=1` will be handled by the Markdown Middleware come with this extension. This middleware generates a markdown (text) version of a html page and keeps content boundaries needed to separate content blocks with specific categories. - **encoding** - *type:* string - *Default:* quoted-printable - *Path:* mod.web_modules.mail.encoding Content transfer encoding to use when sending mails. Possible values: quoted-printable base64 8bit - **charset** - *type:* string - *Default:* utf-8 - *Path:* mod.web_modules.mail.charset Character set to use when sending mails. - **quickMailEncoding** - *type:* string - *Default:* quoted-printable - *Path:* mod.web_modules.mail.quickMailEncoding Content transfer encoding to use when sending quick mails. Possible values: quoted-printable base64 8bit - **quickMailCharset** - *type:* string - *Default:* utf-8 - *Path:* mod.web_modules.mail.quickMailCharset Default character set for mails built from external pages. Note: This is the character set used in mails when they are built from external pages and character set cannot be auto-detected. - **redirect** - *type:* boolean - *Default:* - *Path:* mod.web_modules.mail.redirect If set, links longer than 76 characters found in plain text content will be redirected. This is realized by creating protected TYPO3 redirect entries, which hold the long URL. Links in the mail will be replaced by URLs starting with /redirect-\[md5hash\]. Note: This configuration determines how Quick Mails are handled and further sets the default value for mails from internal pages. - **redirectAll** - *type:* boolean - *Default:* - *Path:* mod.web_modules.mail.redirectAll If set and redirect is set as well, all links in plain text content will be redirected, not only links longer than 76 characters. - **clickTracking** - *type:* boolean - *Default:* - *Path:* mod.web_modules.mail.clickTracking Enables click tracking - **clickTrackingMailTo** - *type:* boolean - *Default:* - *Path:* mod.web_modules.mail.clickTrackingMailTo Enables click tracking for mailto-links as well - **trackingPrivacy** - *type:* boolean - *Default:* - *Path:* mod.web_modules.mail.trackingPrivacy Do not add recipient id to click tracking. - **authCodeFields** - *type:* string - *Default:* uid - *Path:* mod.web_modules.mail.authCodeFields Default list of fields to be used in the computation of the authentication code included in unsubscribe links and for click tracking of mails. - **httpUsername** - *type:* string - *Default:* - *Path:* mod.web_modules.mail.httpUsername The username used to fetch the mail content, if mail content is protected by HTTP authentication. Note: The username is NOT sent in the mail! Note: If you do not specify a username and password and a newsletter page happens to be protected, an error will occur and no mail content will be fetched. - **httpPassword** - *type:* string - *Default:* - *Path:* mod.web_modules.mail.httpPassword The password used to fetch the mail content, if mail content is protected by HTTP authentication. Note: The password is NOT sent in the mail! Note: If you do not specify a username and password and a newsletter page happens to be protected, an error will occur and no mail content will be fetched. - **simulateUsergroup** - *type:* integer - *Default:* - *Path:* mod.web_modules.mail.simulateUsergroup If mail content is protected by Frontend user authentication, enter a user group that has access to the page. Note: If you do not specify a usergroup uid and the page has frontend user restrictions, an error will occur and no mail content will be fetched. - **testMailGroupUids** - *type:* string - *Default:* - *Path:* mod.web_modules.mail.testMailGroupUids List of UID numbers of test recipient groups. Before sending mails, you should test the mail content by sending test mails to one or more test recipients. The available recipient groups for testing are determined by this list of UID numbers. So first, find out the UID numbers of the recipient groups you wish to use for testing, then enter them here in a comma-separated list. - **testTtAddressUids** - *type:* string - *Default:* - *Path:* mod.web_modules.mail.testTtAddressUids List of UID numbers of test recipients. Before sending mails, you should test the mail content by sending test mails to one or more test recipients. The available recipients for testing are determined by this list of UID numbers. So first, find out the UID numbers of the recipients you wish to use for testing, then enter them here in a comma-separated list. - **showContentTitle** - *type:* boolean - *Default:* - *Path:* mod.web_modules.mail.showContentTitle If set to 1, only the title/name (instead of the path) of a clicked target will be shown in the mail reports. This cost a bit performance, since the title/name has to be fetched and parsed from the target url. - **prependContentTitle** - *type:* boolean - *Default:* - *Path:* mod.web_modules.mail.prependContentTitle If set to 1, the content title (see above) and the clicked target path will be shown. Only relevant if showContentTitle is set to 1. - **maxLabelLength** - *type:* int - *Default:* - *Path:* mod.web_modules.mail.maxLabelLength Maximum length of the clicked statistics label - **sendPerCycle** - *type:* int - *Default:* 50 - *Path:* mod.web_modules.mail.sendPerCycle Send per circle for manual sending trigger via Queue module - **queueLimit** - *type:* int - *Default:* 10 - *Path:* mod.web_modules.mail.queueLimit Number of mailings listed in queue module. If zero (0) all current and past mails will be visible. - **refreshRate** - *type:* int - *Default:* 5 - *Path:* mod.web_modules.mail.refreshRate Number of seconds between automatic refreshing of delivery progress bars. Set to 0, to stop automatic refreshing. - **storage** - *type:* int+ - *Default:* - *Path:* mod.web_modules.mail.importer.storage PID of the target SysFolder, in which the recipients will be imported. - **getAssignmentsFromStorageFallback** - *type:* string - *Default:* true - *Path:* mod.web_modules.mail.importer.getAssignmentsFromStorageFallback If startingPoints not defined, get categories or groups from defined storage - **inputDisable** - *type:* string - *Default:* true - *Path:* mod.web_modules.mail.importer.inputDisable Input field are shown, but user cannot change the values. - **removeExisting** - *type:* boolean - *Default:* - *Path:* mod.web_modules.mail.importer.removeExisting Remove all Addresses in the storage folder before importing. - **firstFieldname** - *type:* boolean - *Default:* - *Path:* mod.web_modules.mail.importer.firstFieldname First row of import file has field names. - **delimiter** - *type:* string - *Default:* comma - *Path:* mod.web_modules.mail.importer.delimiter Field delimiter (data fields are separated by...) \[comma, semicolon, colon, tab\] - **encapsulation** - *type:* string - *Default:* doubleQuote - *Path:* mod.web_modules.mail.importer.encapsulation Field encapsulation character (data fields are encapsulated with...) \[doubleQuote, singleQuote\] - **trimCharacters** - *type:* string - *Default:* doubleQuote - *Path:* mod.web_modules.mail.importer.trimCharacters Field encapsulation character (data fields are encapsulated with...) \[doubleQuote, singleQuote\] - **validEmail** - *type:* bool - *Default:* - *Path:* mod.web_modules.mail.importer.validEmail Only update/import valid emails from csv data. - **removeDublette** - *type:* bool - *Default:* - *Path:* mod.web_modules.mail.importer.removeDublette Filter email dublettes from csv data. If a dublette is found, only the first entry is imported. - **setUsernameToEmailIfEmpty** - *type:* bool - *Default:* true - *Path:* mod.web_modules.mail.importer.setUsernameToEmailIfEmpty If importing to frontend user, set username to contents of email if username is empty - **uniqueMode** - *type:* string - *Default:* update - *Path:* mod.web_modules.mail.importer.uniqueMode Determines what happens when recipient already exists. Skip creating record \[skip\]. Create renamed record \[rename\]. Update existing record, keeping existing assignments and adding new \[update\] - **recordUnique (tt_address)** - *type:* string - *Default:* - *Path:* mod.web_modules.mail.importer.recordUnique Specify the field of the tt_address table, which determines the uniqueness of imported subscribers. \[email, name\] - **recordUnique (fe_users)** - *type:* string - *Default:* - *Path:* mod.web_modules.mail.importer.recordUniqueFeUsers Specify the field of the fe_users table, which determines the uniqueness of imported subscribers. \[username, email, name\] - **filterColumns** - *type:* string - *Default:* - *Path:* mod.web_modules.mail.importer.filterColumns Filter allowed columns to be imported - **inputDisable** - *type:* boolean - *Default:* - *Path:* mod.web_modules.mail.importer.inputDisable Disable all of above input field, so that no user can change it. - **resultOrder** - *type:* string - *Default:* new, update, invalidEmail, double - *Path:* mod.web_modules.mail.importer.resultOrder Set the order of import result. Keywords separated with comma. \[new, update, invalidEmail, double\] ## Restrict categories example {#restrict-categories-example} Here is an Page TSconfig example of how to restrict a list of categories to a specific parent category (has uid 1 in this example): ```typoscript TCEFORM.tt_content.categories.config.treeConfig.startingPoints = 1 TCEFORM.tt_content.categories.config.treeConfig.appearance.nonSelectableLevels = 0 TCEFORM.tt_address.categories.config.treeConfig.startingPoints = 1 TCEFORM.tt_address.categories.config.treeConfig.appearance.nonSelectableLevels = 0 TCEFORM.fe_users.categories.config.treeConfig.startingPoints = 1 TCEFORM.fe_users.categories.config.treeConfig.appearance.nonSelectableLevels = 0 TCEFORM.tx_mail_domain_model_group.categories.config.treeConfig.startingPoints = 1 TCEFORM.tx_mail_domain_model_group.categories.config.treeConfig.appearance.nonSelectableLevels = 0 ``` This config placed in the Page TSconfig field of the MAIL sys-folder page, will reduce all categories shown in tt_content, tt_address, fe_users and for simple list recipient groups living inside the MAIL sys-folder to the parent category with the uid 1. Beside of this, the `nonSelectableLevels = 0` lines prevent the parent category itself to be selectable.