Using the DataHandler in scripts¶

You can use the class \TYPO3\CMS\Core\DataHandling\DataHandler in your own scripts: Inject the DataHandler class, build a $data/$cmd array you want to pass to the class, and call a few methods.

Attention

Mind that these scripts have to be run in the backend scope! There must be a global $GLOBALS['BE_USER'] object.

Table of Contents

Using the DataHandler in a Symfony command¶

It is possible to use the DataHandler for scripts started from the command line or by the scheduler as well. You can do this by creating a Symfony Command.

These scripts use the _cli_ backend user. Before using the DataHandler in your execute() method, you should make sure that this user is initialized like this:

EXT:my_extension/Classes/Command/MyCommand.php

\TYPO3\CMS\Core\Core\Bootstrap::initializeBackendAuthentication();

If you forget to add the backend user authentication, an error similar to this will occur:

[1.2.1]: Attempt to modify table "pages" without permission

DataHandler examples¶

What follows are a few code listings with comments which will provide you with enough knowledge to get started. It is assumed that you have populated the $data and $cmd arrays correctly prior to these chunks of code. The syntax for these two arrays is explained in the DataHandler basics chapter.

The DataHandler class can be injected into the constructor via dependency injection.

Submitting data¶

This is the most basic example of how to submit data into the database.

EXT:my_extension/Classes/DataHandling/MyClass.php

<?php

declare(strict_types=1);

namespace MyVendor\MyExtension\Classes\DataHandling;

use TYPO3\CMS\Core\DataHandling\DataHandler;

final class MyClass
{
    public function __construct(
        private readonly DataHandler $dataHandler,
    ) {}

    public function submitData(): void
    {
        // Prepare the data array
        $data = [
            // ... the data ...
        ];

        // Register the $data array inside DataHandler and initialize the
        // class internally.
        $this->dataHandler->start($data, []);

        // Submit data and have all records created/updated.
        $this->dataHandler->process_datamap();
    }
}

Executing commands¶

The most basic way of executing commands:

EXT:my_extension/Classes/DataHandling/MyClass.php

<?php

declare(strict_types=1);

namespace MyVendor\MyExtension\Classes\DataHandling;

use TYPO3\CMS\Core\DataHandling\DataHandler;

final class MyClass
{
    public function __construct(
        private readonly DataHandler $dataHandler,
    ) {}

    public function executeCommands(): void
    {
        // Prepare the cmd array
        $cmd = [
            // ... the cmd structure ...
        ];

        // Registers the $cmd array inside the class and initialize the
        // class internally.
        $this->dataHandler->start([], $cmd);

        // Execute the commands.
        $this->dataHandler->process_cmdmap();
    }
}

Clearing cache¶

In this example the cache clearing API is used. No data is submitted, no commands are executed. Still you will have to initialize the class by calling the start() method (which will initialize internal state).

Note

Clearing a given cache is possible only for users that are "admin" or have specific permissions to do so.

EXT:my_extension/Classes/MyClass.php

<?php

declare(strict_types=1);

namespace MyVendor\MyExtension\Classes\DataHandling;

use TYPO3\CMS\Core\DataHandling\DataHandler;

final class MyClass
{
    public function __construct(
        private readonly DataHandler $dataHandler,
    ) {}

    public function clearCache(): void
    {
        $this->dataHandler->start([], []);
        $this->dataHandler->clear_cacheCmd('all');
    }
}

Caches are organized in groups. Clearing "all" caches will actually clear caches from the "all" group and not really all caches. Check the caching framework architecture section for more details about available caches and groups.

Complex data submission¶

Imagine the $data array contains something like this:

$data = [
    'pages' => [
        'NEW_1' => [
            'pid' => 456,
            'title' => 'Title for page 1',
        ],
        'NEW_2' => [
            'pid' => 456,
            'title' => 'Title for page 2',
        ],
    ],
];

This aims to create two new pages in the page with uid "456". In the following code this is submitted to the database. Notice the reversing of the order of the array: This is done because otherwise "page 1" is created first, then "page 2" in the same PID meaning that "page 2" will end up above "page 1" in the order. Reversing the array will create "page 2" first and then "page 1" so the "expected order" is preserved.

To insert a record after a given record, set the other record's negative uid as pid in the new record you're setting as data.

Apart from this a "signal" will be send that the page tree should be updated at the earliest occasion possible. Finally, the cache for all pages is cleared.

EXT:my_extension/Classes/DataHandling/MyClass.php

<?php

declare(strict_types=1);

namespace MyVendor\MyExtension\Classes\DataHandling;

use TYPO3\CMS\Backend\Utility\BackendUtility;
use TYPO3\CMS\Core\DataHandling\DataHandler;

final class MyClass
{
    public function __construct(
        private readonly DataHandler $dataHandler,
    ) {}

    public function submitComplexData(): void
    {
        $data = [
            'pages' => [
                'NEW_1' => [
                    'pid' => 456,
                    'title' => 'Title for page 1',
                ],
                'NEW_2' => [
                    'pid' => 456,
                    'title' => 'Title for page 2',
                ],
            ],
        ];

        $this->dataHandler->reverseOrder = true;
        $this->dataHandler->start($data, []);
        $this->dataHandler->process_datamap();
        BackendUtility::setUpdateSignal('updatePageTree');
        $this->dataHandler->clear_cacheCmd('pages');
    }
}

Both data and commands executed with alternative user object¶

In this case it is shown how you can use the same object instance to submit both data and execute commands if you like. The order will depend on the order in the code.

First the start() method is called, but this time with the third possible argument which is an alternative $GLOBALS['BE_USER'] object. This allows you to force another backend user account to create stuff in the database. This may be useful in certain special cases. Normally you should not set this argument since you want DataHandler to use the global $GLOBALS['BE_USER'].

EXT:my_extension/Classes/DataHandling/MyClass.php

<?php

declare(strict_types=1);

namespace MyVendor\MyExtension\Classes\DataHandling;

use TYPO3\CMS\Core\Authentication\BackendUserAuthentication;
use TYPO3\CMS\Core\DataHandling\DataHandler;

final class MyClass
{
    public function __construct(
        private readonly DataHandler $dataHandler,
    ) {}

    public function useAlternativeUser(BackendUserAuthentication $alternativeBackendUser): void
    {
        // Prepare the data array
        $data = [
            // ... the data ...
        ];

        // Prepare the cmd array
        $cmd = [
            // ... the cmd structure ...
        ];

        $this->dataHandler->start($data, $cmd, $alternativeBackendUser);
        $this->dataHandler->process_datamap();
        $this->dataHandler->process_cmdmap();
    }
}

Error handling¶

The data handler has a property errorLog as an array. In this property, the data handler collects all errors. You can use these, for example, for logging or other error handling.

EXT:my_extension/Classes/DataHandling/MyClass.php

<?php

declare(strict_types=1);

namespace MyVendor\MyExtension\Classes\DataHandling;

use Psr\Log\LoggerInterface;
use TYPO3\CMS\Core\DataHandling\DataHandler;

final class MyClass
{
    public function __construct(
        private readonly DataHandler $dataHandler,
        private readonly LoggerInterface $logger,
    ) {}

    public function handleError(): void
    {
        // ... previous call of DataHandler's process_datamap() or process_cmdmap()

        if ($this->dataHandler->errorLog !== []) {
            $this->logger->error('Error(s) while creating content element');
            foreach ($this->dataHandler->errorLog as $log) {
                // handle error, for example, in a log
                $this->logger->error($log);
            }
        }
    }
}