.. ================================================== .. FOR YOUR INFORMATION .. -------------------------------------------------- .. -*- coding: utf-8 -*- with BOM. .. include:: ../Includes.txt .. _sso-configuration: .. _admin-manual-kerberos-apache-basic-configuration: Basic Kerberos configuration of intranet.example.com ---------------------------------------------------- The method described here as five steps: #. Install the ``mod_auth_kerb`` authentication module. #. Create a :term:`service principal ` for the web server. #. Create a keytab for the service principal. #. Specify the authentication method to be used. #. Specify a list of authorized users or user groups. First of all, you should make sure the clocktime of :term:`KDC`, workstation and web server is in sync (5 minutes are the highest difference you may allow for Kerberos to work properly). You may use `NTP `_ for that task. .. _sso-configuration-module: .. _admin-manual-kerberos-apache-basic-configuration-module: Installing the mod_auth_kerb authentication module ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Within an ``intranet.example.com`` shell, install the package: .. code-block:: bash $ sudo apt-get install libapache2-mod-auth-kerb krb5-user .. hint:: ``krb5-user`` is not an actual requirement but it will provide handy command-line tools for Kerberos. In additional to ``libapache2-mod-auth-kerb``, this will install the dependency package ``krb5-config`` and then show you a configuration wizard asking for: - **Default Kerberos version 5 realm.** Use ``EXAMPLE.COM`` (in capital letters). - **The KDC.** My Active Directory server is ``ws2008r2.example.com``, replace by your own. In a larger organization, you probably have two domain controllers, for redundancy reason. - **The administration server.** This is typically the same as the LDAP/Active Directory server or in case of multiple domain controllers, this should be normally set to the master. Settings you provide are then stored within configuration file :file:`/etc/krb5.conf` which should look like this after the wizard configuration: .. code-block:: none [libdefaults] default_realm = EXAMPLE.COM [realms] EXAMPLE.COM = { kdc = ws2008r2.example.com #kdc = other-kdc.example.com #master_kdc = ws2008r2.example.com admin_server = ws2008r2.example.com } [domain_realm] .example.com = EXAMPLE.COM [logging] kdc = SYSLOG:NOTICE admin_server = SYSLOG:NOTICE default = SYSLOG:NOTICE .. note:: A description of each section and the meaning of keys is available on http://web.mit.edu/kerberos/krb5-1.5/krb5-1.5/doc/krb5-admin/krb5.conf.html. You should now check that Kerberos works on ``intranet.example.com``. Do a basic check using :command:`kinit`: #. Ensure that ``intranet`` can reach :term:`KDC` ``ws2008rs2`` via the network (:command:`ping`, ...). #. Have a username and password in Windows Domain ``EXAMPLE.COM``. In this example ``einstein`` is used as username. #. Within the shell, type: .. code-block:: bash $ kinit einstein@EXAMPLE.COM If everything is OK the command will ask you for ``einstein``'s domain password and terminates without an error message. .. note:: If command fails with .. code-block:: none kinit: Cannot resolve servers for KDC in realm "example.com" while getting initial credentials then it most probably means that you did not pay attention to writing the realm in CAPITAL LETTERS. #. Finally use :command:`klist` to show the initial ticket you have got from the KDC: .. code-block:: bash $ klist Default principal: einstein@EXAMPLE.COM Valid starting Expires Service principal 31/10/2014 13:12 31/10/2014 23:11 krbtgt/EXAMPLE.COM@EXAMPLE.COM renew until 01/11/2014 13:12 .. _sso-configuration-principal: .. _admin-manual-kerberos-apache-basic-configuration-principal: Creating a service principal for the web server ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :term:`SPNEGO` requires that a Kerberos service principal be created for the web server. The service name is defined to be ``HTTP``, so for the server ``intranet.example.com`` the required service principal name is ``HTTP/intranet.example.com@EXAMPLE.COM``. #. Create a dummy account in Windows Domain ``EXAMPLE.COM``. It is used like a machine account **but is nevertheless a standard user account**. In this example the name of dummy account is ``kerbdummy1``. #. Log in to the domain controller ``ws2008r2`` and use the Windows command line tool :command:`ktpass` to map the dummy account ``kerbdummy1`` to the service principal ``HTTP/intranet.example.com@EXAMPLE.COM``. You need that service principal to *kerberize* host ``intranet``: .. code-block:: none C:\>ktpass -princ HTTP/intranet.example.com@EXAMPLE.COM -mapuser kerbdummy1@EXAMPLE.COM -crypto AES256-SHA1 -ptype KRB5_NT_PRINCIPAL -pass very!$longp@ssw0rd -out C:\temp\intranetkeytab .. note:: If you have to target Windows XP machines, ``AES256-SHA1`` is not supported. Use the legacy crypto ``RC4-HMAC-NT`` instead. .. warning:: Even if you target recent machines such as running Windows 8.x, ``AES256-SHA1`` may not be supported either. Please check section :ref:`sso-pitfalls-basic-authentication` for details. #. Copy file :file:`C:\\temp\\intranetkeytab` from the domain controller ``ws2008r2`` to the location where it should reside on host ``intranet``, in our example :file:`/etc/apache2/http_intranet.keytab` and make ``www-data`` its owner. .. note:: An alternate way to create the needed keytab file is with the help of :command:`kadmin` directly on your Linux machine. Please refer to `www.microhowto.info`_ for instructions. .. _www.microhowto.info: http://www.microhowto.info/howto/configure_apache_to_use_kerberos_authentication.html#idp145152 #. Check if the KDC sends correct tickets by checking in detail: - ticket's kvno **must** match kvno in keytab - principal name in ticket **must** match the principal name in keytab .. code-block:: bash $ kvno HTTP/intranet.example.com@EXAMPLE.COM HTTP/intranet.example.com@EXAMPLE.COM: kvno = 4 $ klist -e Ticket cache: FILE:/tmp/krb5cc_0 Default principal: HTTP/intranet.example.com@EXAMPLE.COM Valid starting Expires Service principal 31/10/2014 14:53 01/11/2014 00:52 krbtgt/EXAMPLE.COM@EXAMPLE.COM renew until 01/11/2014 14:53, Etype (skey, tkt): aes256-cts-hmac-sha1-96, ... 31/10/2014 15:09 01/11/2014 00:52 HTTP/intranet.example.com@EXAMPLE.COM renew until 01/11/2014 14:53, Etype (skey, tkt): arcfour-hmac, arcfour-hmac $ klist -e -k -t /etc/apache2/http_intranet.keytab Keytab name: FILE:http_intranet.keytab KVNO Timestamp Principal ---- ---------------- --------------------------------------------------------- 4 01/01/1970 01:00 HTTP/intranet.example.com@EXAMPLE.COM (aes256-cts-hmac-sha1-96) #. Check that the key has been correctly added to the keytab by attempting to use it to authenticate as the service principal, then view the resulting ticket-granting ticket using :command:`klist`: .. code-block:: bash $ kinit -k -t /etc/apache2/http_intranet.keytab HTTP/intranet.example.com $ klist Ticket cache: FILE:/tmp/krb5cc_0 Default principal: HTTP/intranet.example.com@EXAMPLE.COM Valid starting Expires Service principal 31/10/2014 14:11 01/11/2014 00:10 krbtgt/EXAMPLE.COM@EXAMPLE.COM renew until 01/11/2014 14:11 .. note:: if command fails with .. code-block:: none kinit: Generic preauthentication failure while getting initial credentials It *may* be related to using a legacy crypto. Try to edit file :file:`/etc/krb5.conf` and update it to actively specify older cryptos: .. code-block:: ini [libdefaults] default_realm = EXAMPLE.COM default_tkt_enctypes = rc4-hmac des-cbc-crc des-cbc-md5 default_tgs_enctypes = rc4-hmac des-cbc-crc des-cbc-md5 .. _sso-configuration-authentication: .. _admin-manual-kerberos-apache-basic-configuration-authentication: Specifying the authentication method to be used ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Apache must be told which parts of which web sites are to use authentication provided by ``mod_auth_kerb``. This is done using the ``AuthType`` directive with a value of ``Kerberos``. In order to protect the whole TYPO3 website, add following snippet to your virtual host configuration: .. code-block:: apache AuthType Kerberos AuthName "Intranet of example.com" KrbMethodNegotiate on KrbMethodK5Passwd off # Allow shorter username (without realm): KrbAuthRealms EXAMPLE.COM KrbServiceName HTTP Krb5Keytab /etc/apache2/http_intranet.keytab # Disable the verification tickets against local keytab to # prevent KDC spoofing attacks # It should be used only for testing purposes KrbVerifyKDC off .. note:: Other configuration options are available on http://modauthkerb.sourceforge.net/configure.html. .. note:: If there is a need for the web site to be accessible to its authorized users from machines that are not part on the Kerberos realm, you may let ``mod_auth_kerb`` ask the user for her password using basic authentication and then validate that password by attempting to authenticate to the KDC. Please note however that this is significantly less secure than true Kerberos authentication: .. image:: ../Images/basic-authentication.png :alt: Basic Authentication To do so, change: .. code-block:: apache KrbMethodK5Passwd on .. warning:: If you need to enable fallback to basic authentication, you should do that in conjunction with SSL since the password is sent Base64-encoded, that is, as readable as clear text. The use of SSL encryption is also recommended if you are using the Negotiate method. .. _sso-configuration-authorization: .. _admin-manual-kerberos-apache-basic-configuration-authorization: Specifying a list of authorized users or user groups ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Having an authentication method does not by itself restrict access to the web site until you disallow access by anonymous users using ``Require`` directive: .. code-block:: apache # ... Require valid-user Please refer to the `Apache documentation`_ if you want to restrict access to certain users or groups (if so, you will certainly need to use another authorization module such as ``mod_authnz_ldap``). .. _Apache documentation: https://httpd.apache.org/docs/2.2/howto/auth.html Final step is to reload the Apache configuration: .. code-block:: bash $ sudo apache2ctl configtest Syntax OK $ sudo service apache2 force-reload You will need to access your website from a machine within your domain or by authenticating with the basic authentication dialog, if enabled. TYPO3 will then read the authenticated username from ``$_SERVER['REMOTE_USER']`` and silently create the frontend user session, if it does not exist yet. You do not need any frontend login plugin for your website. .. note:: If you are not using Microsoft Internet Explorer, you may need to configure your browser to enable Single Sign-On. Please refer to https://wiki.shibboleth.net/confluence/display/SHIB2/Single+sign-on+Browser+configuration.