Description

These objects contain the actual configuration of the RTE interface. For the properties available, refer to the table below.This is a description of how you can customize in general and override for specific fields/types.

'RTE.default' configures the RTE for all tables/fields/types

'RTE.config.[ tablename ].[ field ]' configures a specific field. The values inherit the values from 'RTE.default' in fact this is overriding values.

'RTE.config.[ tablename ].[ field ].types.[ type ]' configures a specific field in case the 'type'-value of the field matches type . Again this overrides the former settings.

Description

If set, the editor is disabled.

Description

List of buttons that should be enabled in the editor toolbar.

Note: showButtons = * shows all available buttons.

Available buttons are: blockstylelabel, blockstyle, textstylelabel, textstyle, fontstyle, fontsize, formatblock, blockquote, insertparagraphbefore, insertparagraphafter, lefttoright, righttoleft, language, showlanguagemarks, left, center, right, justifyfull, orderedlist, unorderedlist, definitionlist, definitionitem, outdent, indent, formattext, bidioverride, big, bold, citation, code, definition, deletedtext, emphasis, insertedtext, italic, keyboard, monospaced, quotation, sample, small, span, strikethrough, strong, subscript, superscript, underline, variable, textcolor, bgcolor, textindicator, editelement, showmicrodata, emoticon, insertcharacter, insertsofthyphen, line, link, unlink, image, table, user, acronym, findreplace, spellcheck, chMode, inserttag, removeformat, copy, cut, paste, pastetoggle, pastebehaviour, undo, redo, about, toggleborders, tableproperties, tablerestyle, rowproperties, rowinsertabove, rowinsertunder, rowdelete, rowsplit, columnproperties, columninsertbefore, columninsertafter, columndelete, columnsplit, cellproperties, cellinsertbefore, cellinsertafter, celldelete, cellsplit, cellmerge

Note: Buttons textcolor, bgcolor, fontstyle and fontsize are enabled only if «Enable features that use the style attribute> is checked in the extension manager.

Note: If extension static_info_tables is not installed, the spellcheck, language and acronym buttons are not enabled.

Note: If the encoding of the content element is not either iso-8859-1 or utf-8, the spellcheck button is not enabled.

Note: Buttons user and acronym are never available in the front end.

Note: Button unlink is not available if button link is not available.

Note: None of the table operations buttons is available if the button table is not available.

Note: Opera, Safari 5+ and Chrome 6+ do not support the copy, cut and paste buttons.

Description

List of buttons that should not be enabled in the editor toolbar.

Description

Specifies the order and grouping of buttons in the RTE tool bar. The keywords space, bar and linebreak may be used to insert a space, a separator or a line break at the corresponding position in the tool bar.

Default: blockstylelabel, blockstyle, space, textstylelabel, textstyle, linebreak,

bar, formattext, bold, strong, italic, emphasis, big, small, insertedtext, deletedtext, citation, code, definition, keyboard, monospaced, quotation, sample, variable, bidioverride, strikethrough, subscript, superscript, underline, span, bar, fontstyle, space, fontsize, bar, formatblock, blockquote, insertparagraphbefore, insertparagraphafter, bar, lefttoright, righttoleft, language, showlanguagemarks, bar, left, center, right, justifyfull, bar, orderedlist, unorderedlist, definitionlist, definitionitem, outdent, indent, bar, textcolor, bgcolor, textindicator, bar, editelement, showmicrodata, emoticon, insertcharacter, insertsofthyphen, line, link, unlink, image, table, user, acronym, bar, findreplace, spellcheck, bar, chMode, inserttag, removeformat, bar, copy, cut, paste, pastetoggle, pastebehaviour, bar, undo, redo, bar, about, linebreak, toggleborders, bar, tableproperties, tablerestyle, bar, rowproperties, rowinsertabove, rowinsertunder, rowdelete, rowsplit, bar, columnproperties, columninsertbefore, columninsertafter, columndelete, columnsplit, bar, cellproperties, cellinsertbefore, cellinsertafter, celldelete, cellsplit, cellmerge

Description

Specifies that all buttons of a button group are displayed on the same line of the tool bar. A button group is delimited by a linebreak or by a bar.

Default: 0

Note: If enabled, the setting is honored only by Mozilla/Firefox and Safari. It is ignored when the browser is Internet Explorer, Opera or Mozilla 1.3.

Description

ISO code of default language of content elements. This language is used by RTE features that insert content, usually in the form of values of html tag attributes, when the language of the content element is not specified. This property applies to TYPO3 BE only.

Default: en

Note: Any value other than 'en' requires Static Info Tables to be installed.

Description

If set, the context menu of the RTE triggered by mouse right click is disabled.

Default: 0

Note: Context menu is not available in Opera.

Description

List of buttons that should be shown in the context menu For the list of available buttons see property showButtons above.

Default: If not specified, all buttons available in the editor toolbar will appear in the context menu, unless they are removed by property contextMenu.hideButtons.

Note: Drop-down lists or select boxes will not be shown in the context menu.

Note: The buttons must be enabled in the editor toolbar.

Note: The buttons will appear in the same order as in the editor toolbar (see property toolbarOrderabove).

Description

List of buttons that should not be shown in the context menu.

Description

Maximum height of the context menu in pixels.

Default: 300

Description

Specifies that the editor status bar should be displayed or not.

Default: 0

Note: showStatusBar is set to 1 in the Typical and Demo default configurations (see chapter on default configurations).

Description

List of fieldsets to remove from the edit element dialogue.

Possible string values are: identification, style, language, microdata, events.

Description

List of fields to remove from the edit element dialogue.

Possible string values are: id, title, language, direction, onkeydown, onkeypress, onkeyup, onclick, ondblclick, onmousedown, onmousemove, onmouseout, onmouseover, onmouseup.

Description

Specifies the order in which the block element types are presented in the block formating drop-down list.

The standard block element types are: p, h1, h2, h3, h4, h5, h6, pre, address, article, aside, blockquote, div, footer, header, nav, section

The list may also contain custom items as specified by the buttons.formatblock.addItems property.

If not set, the default order will be alphabetical, in the language of the current backend user.

Note: If set, any option not in the list will be removed from the drop-down list.

Description

List of default items to be removed from the block formating drop-down list.

The default items are: p, h1, h2, h3, h4, h5, h6, pre, address, article, aside, blockquote, div, footer, header, nav, section

Description

List of custom items to be added to the block formating drop-down list.

Each of the added items should be configured.

Description

Alternative label for the option identified by the item name in the block formating drop-down list.

Note: The string may be a reference to an entry in a localization file of the form LLL:EXT:[ fileref ]:[ labelkey ]

Description

A class name to be assigned to the blocks whenever the item is applied to selected text.

Note: The specified class should be allowed on elements of the block type (using property RTE.default.buttons.blockstyle.tags.[ tagName ].allowedClasses).

Description

A tag name to be assigned to the block elements whenever the (custom) item is applied to selected text.

The value of this property must be equal to one of the standard block element types.

Note: [ item-name ] must not be a standard block tag name.

Note: If [ item-name ] also has property addClass, then the specified class should be allowed on elements of block type tagName (using property RTE.default.buttons.blockstyle.tags.[ tagName ].allowedClasses).

Description

If set, the option label in the block formating drop-down list is prefixed with the tagname.

Default: 0

Description

If set, the option label in the block formating drop-down list is postfixed with the tagname.

Default: 0

Description

A hotkey will be associated with the option of the block formating drop-down list identified by the item name.

Description

Class name to be used when indenting by means of div sections with class attribute.

Default: indent

Description

If set, indentation will be produced by means of blockquote tags instead of div sections with class attribute.

Default: 0

Description

Class name to be used when aligning blocks of text to the left by means of class attribute.

Default: align-left

Note: This property is also used for text aligment in table operations.

Description

Class name to be used when centering blocks of text by means of class attribute.

Default: align-center

Note: This property is also used for text aligment in table operations.

Description

Class name to be used when aligning blocks of text to the right by means of class attribute.

Default: align-right

Note: This property is also used for text aligment in table operations.

Description

Class name to be used when justifying blocks of text to both left and right by means of class attribute.

Default: align-justify

Note: This property is also used for text aligment in table operations.

Description

If anyone of these four properties is set, alignment will be produced by means of align attributes instead of class attributes.

Default: 0

Description

Specifies the classes allowed for the block element identified by the tag name. Any string in the list may contain wild card characters. The wild card character is "*" and stands for any sequence of characters.

The classes must also be defined, using the specific tag selector, in the CSS file specified by the contentCSS property.

If the property is empty for any tag, classes associated with the given tag in the contentCSS file are used.

The classes are presented in the drop-down list in alphabetical order in the language used by the backend user.

Description

Specifies the classes allowed for all block elements, in addition to the classes allowed for each specific element (see above).

The classes must also be defined, without any tag selector, in the CSS file specified contentCSS property.

The classes are presented in the drop-down list in alphabetical order in the language used by the backend user.

Description

Specifies that classes not associated with any tag in the contentCSS style sheet should be or should not be shown in the block style drop- down list.

Default: 0

Description

If set, the option name in the block style drop-down list is prefixed with the class name.

Default: 0

Description

If set, the option name e in the block style drop-down list is postfixed with the class name.

Default: 0

Description

If set, the styling is removed on the options block styling drop-down list.

Default: 0

See value property of RTE.classes array.

Description

Specifies the order in which the options, or inline element types, are presented in the text formating drop-down list.

If not set, the default order will be alphabetical, in the language of the current backend user.

Description

List of options to be removed from the text formating drop-down list using same names as toolbar elements.

Description

If set, the option name in the text formating drop-down list is prefixed with the tagname.

Default: 0

Description

If set, the option name e in the text formating drop-down list is postfixed with the tagname.

Default: 0

Description

Specifies the classes allowed for each inline element (tag) in the text styling drop-down list. Any string in the list may contain wild card characters. The wild card character is "*" and stands for any sequence of characters.

Supported tags are: abbr, acronym, b, bdo, big, cite, code, del, dfn, em, i, ins, kbd, q, samp, small, span, strike, strong, sub, sup, tt, u, var

The classes must also be defined in the CSS file specified by contentCSS property.

If the property is empty for any tag, classes associated with the given tag in the contentCSS file are used.

The classes are presented in the textstyle drop-down list in alphabetical order in the language used by the backend user.

Description

Specifies the classes allowed for all inline elements, in addition to the classes allowed for each specific element (see above).

The classes must also be defined in the CSS file specified by contentCSS property.

The classes are presented in the drop-down list in alphabetical order in the language used by the backend user.

Description

Specifies that classes not associated with any tag in the contentCSS style sheet should be or should not be shown in the text styling drop- down list.

Default: 0

Description

If set, the option name in the text styling drop-down list is prefixed with the class name.

Default: 0

Description

If set, the option name e in the text styling drop-down list is postfixed with the class name.

Default: 0

Description

If set, the styling is removed on the options text styling drop-down list.

Default: 0

See value property of RTE.classes array.

Description

List of language ISO codes to which the language marking drop-down list is limited to.

Note: If not set, all languages found in the static_languages table will appear in the drop-down list.

Description

If set, the lang attribute is used fro language marks.

Default: 1

Note: If both useLangAttribute and useXmlLangAttribute are unset, the lang attribute will be used.

Description

If set, the xml:lang attribute is used fro language marks.

Default: 0

Description

If set, the option name e in the language marking drop-down list is prefixed with the language ISO code.

Default: 0

Description

If set, the option name e in the language marking drop-down list is postfixed with the language ISO code.

Default: 0

Description

If set, personal dictionaries are enabled.

Default: 0

Note: The feature must also be enabled in User TSconfig.

Note: Personal dictionaries are stored in subdirectories of uploads/tx_rtehtmlarea

Description

List of Aspell dictionary codes to which the drop-down list of dictionaries is limited in the spell checker dialogue.

Note: If not set, all dictionaries obtained from Aspell will appear in the drop-down list.

Description

Aspell dictionary code of the dictionary to be used by default to spell check a content element in the language specified by the ISO code. The specified dictionary will be pre-selected in the drop-down list of dictionaries.

Default: the language ISO code.

Description

If set, the TYPO3 image browser is disabled.

Default: 0

Note: The TYPO3 image browser is never available when the editor is used in the frontend.

Description

List of tab items to remove from the dialog of the image button. Possible tab items are: magic, plain, dragdrop, image

Note: If key image is in the list, the properties editing tab for any current image will not be presented.

Note: More tabs may be provided by extensions such as DAM.

Note: dragdrop is not available in Opera.

Description

List of tab items in the order in which they should appear in the dialogue window. Items not in the list will not be available.

Note: Items that are removed will not be available (see buttons.image.options.removeItems).

Note: The default order is: image, magic, plain, dragdrop.

Note: The list may include items added by extensions such as DAM.

Note: The default order may be modified by extensions such as DAM.

Description

Maximum width of a magic image in pixels at the time of its initial insertion.

Default: 300

Note: The width of the magic image may be made larger when updating the image properties. However, the image is not recreated, only its HTML width attribute is updated.

Description

Maximum height of a magic image in pixels at the time of its initial insertion.

Default: 1000

Note: By setting a large enough height, images should be resized based on their width.

Note: The height of the magic image may be made larger when updating the image properties. However, the image is not recreated, only its HTML height attribute is updated.

Description

Maximum width of selectable plain images in pixels.

Default: 640

Description

Maximum height of selectable plain images in pixels.

Default: 680

Description

Name of the column of the tx_dam table that will be used to set the image title attribute.

Default: caption

Note: This property is ignored if integration of DAM with the htmlArea RTE is not set in the DAM extension.

Description

List of properties to remove from the image properties editing window. Key list is align, alt, border, class, clickenlarge, float, height, paddingTop, paddingRight, paddingBottom, paddingLeft, title, width

Note: When a plain image is edited, if proc.plainImageMode is set to lockDimentions, lockRatio or lockRatioWhenSmaller, the height property is removed from the properties window. If proc.plainImageMode is set to lockDimensions, both the width and height properties are removed.

Description

Classes available in the Insert/Modify image dialogue.

Each of the listed classes must be defined in the CSS file specified by the contentCSS property.

Description

Class to be assigned by default to an image when it is inserted in the RTE.

Description

If set, the TYPO3 element browser is disabled.

Default: 0

Note: The TYPO3 element browser is never available when the editor is used in the frontend.

Description

List of tab items to remove from the dialog of the link button. Possible tab items are: page,file,url,mail,spec

Note: More tabs may be provided by extensions such as DAM.

Description

If set, the selection of link target is removed from the link insertion/update dialog.

Default : 0

Description

If set, the selection of a popup window as link target is removed from the link insertion/update dialog.

Default: 0

Description

If set, the specification of a page id, without using the page tree, is enabled in the link insertion/update dialog.

Note: This feature is intended for authors who have to deal with a very large page tree. Note that the feature is disabled by default.

Default: 0

Description

If set, an additional field is enabbled in the link insertion/update dialogue allowing authors to specify query parameters to be added on the link

Default: 0

Description

If set, an additional field is enabled in the link insertion/update dialogue allowing authors to specify a rel attribute to be added to the link.

Default: 0

Description

Classes available in the Insert/Modify link dialogue.

These classes may be defined by the RTE.classesAnchor property.

Description

Class to be assigned by default to a link when it is inserted in the RTE. See also buttons.link.[ type ].properties.class.default.

Description

The name of the default class selector for links of the given type. Possible types are: page, file, url, mail, spec. More types may be provided by extensions such as DAM.

Description

If set, a class must be selected for any link. Therefore, the empty option is removed from the class selector.

Description

If set, a class must be selected for any link of the given type. Therefore, the empty option is removed from the class selector. Possible types are: page, file, url, mail, spec. More types may be provided by extensions such as DAM.

Description

If set, the title is set based on the RTE.classesAnchor configuration and cannot be modified by the author.

Description

If set, the title for the given type of link is set based on the RTE.classesAnchor configuration and cannot be modified by the author. Possible types are: page, file, url, mail, spec. More types may be provided by extensions such as DAM.

Description

This sets the default target for new links in the RTE.

Note: See also the classesAnchor configuration.

Description

List of page id's from which to obtain the acronym records.

Note: If not set, the list of current webmounts is used.

Note: If no acronym records are found in the specified page id's, the acronym button will not be present in the toolbar. If no records of type acronym or abreviation are found, the corresponding tab of the acronym dialogue will not be disabled.

Note: In IE, before IE7, the abreviation tab of the acronym dialogue is never shown.

Description

The number of levels in the page tree, under each page listed in buttons.acronym.pages or under each webmount, from which acronyms are retrieved.

Default: 0

Description

If set, the pid's listed under buttons.acronym.pages (see above) are validated against the user's current webmounts.

If not set or if the user is admin, buttons.acronym.pages is ignored and acronyms from all pages are retrieved.

Default: The default value of this property is the value of the property with same name in the backend section of theTYPO3 configuration as set by the Install Tool.

Description

Defines the specific colors generally available in the color selectors. The id-strings must be configured in the RTE.colors array (see description earlier).

Example:

RTE.default {
  colors = color1, color2,noColor
}

Description

Disables the color picker matrix in all color dialogs. The color picker lets you select web-colors.

Description

Lets you remove any of the default font faces in the Font Style selector. Values are ranging from 1 to 9. These are the possible options, and their respective name => value pairs, that you can remove:

1: Arial => Arial,sans-serif

2: Arial Black => 'Arial Black',sans-serif

3: Verdana => Verdana,Arial,sans-serif

4: 'Times New Roman' => 'Times New Roman',Times,serif

5: Garamond => Garamond

6: Lucida Handwriting => Lucida Handwriting

7: Courier => Courier

8: Webdings => Webdings

9: Wingdings => Wingdings

Description

Defines additional fonts available in the font selector. The id- strings must be configured in the RTE.fonts array (see description earlier).

Description

Specifies the name of the default font style. The name is the name of one of the default font faces, or the name associated to one of fonts configured in the RTE.fonts array (see description earlier).

Note: The value associated to the default font style should be exactly the same as the value of the default font-family property specified in the site style sheet as referred to by property RTE.default.contentCSS.

Description

Lets you disable any of the default font sizes available in the Font Size selector. Values are ranging from 1 to 7. These are the possible options, and their respective name => value pairs, that you can remove:

1: Extra small => 8px

2: Very small => 9px

3: Small => 10px

4: Medium => 12px

5: Large => 16px

6: Very large => 24px

7: Extra large => 32px

Description

Defines additional font sizes available in the font size selector. The id-strings must be configured in the RTE.fontSizes array (see description earlier).

Description

Specifies the name of the default font size. The name is the name of one of the default font sizes, or the name associated to one of font sizes configured in the RTE.fontSizes array (see description earlier).

Note: The value associated to the default font size should be exactly the same as the value of the default font-size property specified in the site style sheet as referred to by property RTE.default.contentCSS. For correct behaviour in non-IE browsers, the value of the default font size should be specified in px units.

Description

Specifies that table operations buttons should be hidden in the tool bar or not.

Default: 0

Note: If enabled, table operations will appear only in the context menu, provided that they may be enabled in the given context.

Description

If set, the toggleborders button will be kept in the tool bar even if property hideTableOperationsInToolbar is set.

Default: 0

Description

If set, and if the toggleborders button is enabled, the table borders will be toggled on when a new table is created.

Default : 0

Description

If set, and if the toggleborders button is enabled, the table borders will be toggled on when the RTE opens.

Default : 0

Description

A hotkey will be associated with the specified button-name.

Note: Care should be taken that the hotkey does not conflict with pre- defined hotkeys. If it does, the hotkey will override any previously registered hotkey.

Description

The width of the field in the toolbar when the button is a dropdown list.

Description

The width of the dropdown list when the button is a dropdown list.

Defauls to the width of the field in the toolbar.

Description

The maximum height of the dropdown list when the button is a dropdown list.

Description

The opening width of the dialogue window opened when the button is pressed.

Description

The opening height of the dialogue window opened when the button is pressed.

Description

The opening position from the top of the screen of the dialogue window opened when the button is pressed.

Description

The opening position from the left of the screen of the dialogue window opened when the button is pressed.

Description

If set, the window that is opened when the button is pressed will not be resized to its contents.

Default: 0

Description

If set, the window that is opened when the button is pressed will not be centered in the parent window.

Default: 0

Description

The skin contains the CSS files and the images used to style the editor.

The skin is specified by specifying the location of the main CSS file to be used to style the editor. The folder containing the CSS file MUST also contain a structure of folders and files identical to the structure found in the folder of the default skin. All folder names and all file names must be identical.

Default: EXT:rtehtmlarea/htmlarea/skins/default/htmlarea.css

Note: these example skins do not work in Mozilla 1.3; if the property is set to one of them, the default skin will be used when the browser is Mozilla 1.3.

Description

The CSS file that contains the style definitions that should be applied to the edited contents.

The selectors defined in this file will also be used in the block style and text style selection lists.

Default: EXT:rtehtmlarea/res/contentcss/default.css

For example, this default could be overridden with: fileadmin/styles/my_contentCSS.css

Description

Customization of the server processing of the content - also called 'transformations'.

See Transformations

Description

Specifies that text pasted from external sources, presumably from Microsoft Word, should be "cleaned" or not.

Default: 0

Note:If no HTMLparser configuration is specified, a limited default cleaning operation will be performed. If a HTMLparser specification is specified, parsing will be performed on the server at the time of the paste operation.

Note: Additional cleanup may be performed by the user when the removeformat button is enabled.

Note: Cleaning on paste cannot be performed in Opera.

Note: The same cleaning operation is performed with hotkey CTRL+0, including in Opera.

Description

HTMLparser specification use by the enableWordClean feature.

Default: 0

Note:If no HTMLparser configuration is specified, a limited default cleaning operation will be performed. If a HTMLparser specification is specified, parsing will be performed on the server at the time of the paste operation.

Note: If an HTMLparser configuration is specified, care should be taken that span tags with id attribute are not removed by the cleaning operation. If they are removed, the cursor position will not be restored in non-IE browsers after the paste operation, and the cursor will then be positionned at the start of the text.

Description

The default hotkey of the cleaning operation, CTRL+0, is replaced by CTRL+the specified character.

Description

Specifies that html comments should be removed or not by the editor on save and on toggle to HTML source mode.

Default: 0

Description

List of tags that should be removed by the editor on save and on toggle to HTML source mode.

Description

List of tags that should be removed by the editor, contents included, on save and on toggle to HTML source mode. The tags and the contents inside the tags will be removed.

Description

List of custom tags that may appear in content.

Note: When IE is used with standards mode older than IE9, custom tags are not correctly handle. This list of custom tags is then used to let them be known to IE so that they are correctly handled by this browser.

Description

Specifies that Mozilla/Firefox should use style attributes or not. When enabled, Mozilla/Firefox use span tags with style attributes rather than tags such as b, i, font, etc.

Default: 0

Description

Specifies that the insertion of paragraphs when hitting the Enter key in Mozilla/Firefox and Safari should be disabled.

Default: 0

Note: If NOT enabled, the behavior of Mozilla/Firefox and Safari is modified as follows: when the Enter key is pressed, instead of inserting a br tag, the behavior of Internet Explorer is simulated and a new paragraph is created.

Note: If enabled, the behavior of Mozilla/Firefox and Safari is not modified: a br tag is inserted when the Enter key is pressed.

Description

Specifies that Mozilla/Firefox should not provide handles for resizing objects such as images and tables.

Default: 0

Description

Specifies that trailing br tags should be removed from block elements.

Default: 0

Note: If set, any trailing br tag in a block element will be removed on save and/or change mode. However, multiple trailing br tags will be preserved.

Note: In Mozilla/Firefox/Netscape, whenever some text is entered in an empty block, a trailing br tag is added by the browser.

Description

List of tag names that should NOT be shown by the dialog of the inserttag button.

Note: Listed tag names should be among the following: a, abbr, acronym, address, b, big, blockquote, cite, code, div, em, fieldset, font, h1, h2, h3, h4, h5, h6, i, legend, li, ol, p, pre, q, small, span, strong, sub, sup, table, tt, ul

Description

List of attribute names that should be shown for all tags in the dialog of the inserttag button.

Note: Listed attribute names should be among the following: class, dir, id, lang, onFocus, onBlur, onClick, onDblClick, onMouseDown, onMouseUp, onMouseOver, onMouseMove, onMouseOut, onKeyPress, onKeyDown, onKeyUp, style, title, xml:lang

Description

List of attribute names that should be shown for the specified tagname in the dialog of the inserttag button, in addition to the attribute names specified by property buttons.inserttag.allowedAttribs.

Description

If set, this property will prevent the insertion of paragraphs in table cells when the enter key is pressed.

Default: 0

Description

If set, table handles will be enabled in Firefox. These Firefox- specific handles allow to delete/insert rows and columns using small handles displayed on table borders. However, insert operations also add a style attribute on inserted cells.

Default: 0

Description

Disables the corresponding fieldset in all table operations dialogues.

Default: 0

Description

List of fieldsets to remove from the table creation dialogue. Key list is alignment, borders, color, description, language, layout, spacing, style

Description

List of fieldsets to remove from the table properties edition dialogue. Key list is alignment, borders, color, description, language, layout, spacing, style

Description

List of fields for which a value is required in the table creation and table properties edition dialogues. Possible values are: caption, summary, captionOrSummary

Description

List of fields to remove from the table creation and table properties edition dialogues. Possible values are: width, height, float, headers, language, direction

Description

Default value for the number of rows to include in a table on creation.

Default: 2

Description

Default value for the number of columns to include in a table on creation.

Default: 4

Description

Default selected option in the headers layout selector in the table creation dialogue. Possible values are: none, top, left, both

Default: top

Description

List of items to remove from the headers layout selector in the table creation dialogue. Key list is: none, top, left, both

Default: void

Description

A class to be assigned to the top row when the headers property specifies both.

Default: thead

Description

Default selected class in the table class selector in the table creation dialogue.

Default: void

Description

Default value of the table wdth in the table creation dialogue.

Default: void

Description

Default selected unit in the width unit selector in the table creation dialogue. Possible values are: %, px or em

Default: %

Description

List of items to remove from the table width unit selector in the table creation dialogue. Key list is: %, px, em

Default: void

Description

Default value of the table height in the table creation dialogue.

Default: void

Description

Default selected unit in the height unit selector in the table creation dialogue. Possible values are: %, px or em

Default: %

Description

List of items to remove from the table height unit selector in the table creation dialogue. Key list is: %, px, em

Default: void

Description

Default selected option in the table float selector in the table creation and properties edition dialogues.. Possible values are: not set, left, right

Default: not set

Description

Class name to be assigned when left is selected in the table float selector in the table creation and properties edition dialogues.

Default: float-left

Description

Class name to be assigned when right is selected in the table float selector in the table creation and properties edition dialogues.

Default: float-right

Description

List of items to remove from the table float selector in the table creation and properties edition dialogues. Key list is: not set, left, right

Default: void

Description

Default value of the table cellpadding attribute in the table creation and properties edition dialogues

Default: void

Description

Default value of the table cellspacing attribute in the table creation and properties edition dialogues .

Default: void

Description

Default value of the table border width attribute in the table creation and properties edition dialogues

Default: void

Description

Default selected style in the border style selector in the table creation dialogue. Possible values are: not set, none, dotted, dashed, solid, double, groove, ridge, inset, outset

Default: not set

Description

List of items to remove from the table border style selector in the table creation dialogue. Key list is: not set, none, dotted, dashed, solid, double, groove, ridge, inset, outset

Default: void

Description

List of fieldsets to remove from the table row properties edition dialogue. Key list is alignment, borders, color, language, layout, rowgroup, style

Default: void

Description

List of fields to remove from the table row properties edition dialogue. Possible values are: width, height, language, direction

Default: void

Description

Default value of the row wdth in the table row properties edition dialogue.

Default: void

Description

Default selected unit in the row width unit selector in the table row properties edition dialogue. Possible values are: %, px or em

Default: %

Description

List of items to remove from the row width unit selector in the table row properties edition dialogue. Key list is: %, px, em

Default: void

Description

Default value of the row height in the table row properties edition dialogue.

Default: void

Description

Default selected unit in the row height unit selector iin the table row properties edition dialogue. Possible values are: %, px or em

Default: %

Description

List of items to remove from the row height unit selector in the table row properties edition dialogue. Key list is: %, px, em

Default: void

Description

List of items to remove from the row border style selector in the table row properties edition dialogue. Key list is: not set, none, dotted, dashed, solid, double, groove, ridge, inset, outset

Default: void

Description

List of fieldsets to remove from the column cells properties edition dialogue. Key list is alignment, borders, color, language, layout, style

Description

List of fieldsets to remove from the cell properties edition dialogue. Key list is alignment, borders, color, language, layout, style

Description

List of fields to remove from the cell properties and column cells properties edition dialogues. Possible values are: width, height, language, direction

Default: void

Description

Default value of the row wdth in the cell properties and column cells properties edition dialogues.

Default: void

Description

Default selected unit in the row width unit selector in the cell properties and column cells properties edition dialogues. Possible values are: %, px or em

Default: %

Description

List of items to remove from the row width unit selector in the cell properties and column cells properties edition dialogues. Key list is: %, px, em

Default: void

Description

Default value of the row height in the cell properties and column cells properties edition dialogues.

Default: void

Description

Default selected unit in the row height unit selector in the cell properties and column cells properties edition dialogues. Possible values are: %, px or em

Default: %

Description

List of items to remove from the row height unit selector in the cell properties and column cells properties edition dialogues. Key list is: %, px, em

Default: void

Description

List of items to remove from the cell border style selector in the cell properties and column cells properties edition dialogues. Key list is: not set, none, dotted, dashed, solid, double, groove, ridge, inset, outset

Default: void

Description

If set, and if the pastetoggle button is enabled, the button is toggled to ON when the RTE opens.

Default : 0

Description

If set, and if the pastetoggle button is enabled, the button is hidden in both the toolbar and the context menu. Hence, if buttons.pastetoggle.setActiveOnRteOpen is also set, all paste operations will be performed using the set clean paste behaviour.

Default : 0

Note: For BE operations, the default or overriding clean paste behaviour may be set in User TSconfig.

Description

List of tags to be kept when pasting content while the specified behaviour is enabled. The behaviour may be pasteStructure or pasteFormat.

Default:

- for pasteStructure: a, p, h[0-6], pre, address, article, aside, blockquote, div, footer, header, nav, section, hr, br, table, thead, tbody, tfoot, caption, tr, th, td, ul, ol, dl, li, dt, dd

- for pasteFormat: a, p, h[0-6], pre, address, article, aside, blockquote, div, footer, header, nav, section, hr, br, table, thead, tbody, tfoot, caption, tr, th, td, ul, ol, dl, li, dt, dd, b, bdo, big, cite, code, del, dfn, em, i, ins, kbd, label, q, samp, small, strike, strong, sub, sup, tt, u, var

Description

List of attributes to be removed from all tags when pasting content while the specified behaviour is enabled. The behaviour may be pasteStructure or pasteFormat.

Default:

- for pasteStructure: id, on*, style, class, className, lang, align, valign, bgcolor, color, border, face, .*:.*

- for pasteFormat: id, on*, style, class, className, lang, align, valign, bgcolor, color, border, face, .*:.*

Description

If set, the specified value will override the calculated height of the RTE. This includes the height of the toolbar, of the editing area and of the status bar.

See also User TSconfig options.RTESmallHeight and options.RTELargeHeightIncrement

Note: This property may be overridden by the BE user configuration. See User TSconfig.

Description

If set, the specified value will override the calculated width of the RTE editing area. Note that a percentage may be specified.

Note: The property is ignored in IE if the value is a percentage.

Note: This property may be overridden by the BE user configuration. See User TSconfig.

Description

If set, the RTE is resizable.

Default: 0

Note: This property may be overridden by the BE user configuration. See User TSconfig.

Description

If the RTE is resizable, this is the maximal height of the RTE, including the tool bar, the editing area and the status bar.

Default: 2000

Note: This property may be overridden by the BE user configuration. See User TSconfig.

Description

The default opening position from the top of the screen of a dialogue window opened when a button is pressed.

Note: May be averridden by a specific button configuration.

Description

The default opening position from the left of the screen of a dialogue window opened when a button is pressed.

Note: May be averridden by a specific button configuration.

Description

If set, the window that is opened when any button is pressed will not be resized to its contents.

Default: 0

Description

If set, the window that is opened when any button is pressed will not be centered in the parent window.

Default: 0

Description

Configuration of the categories of user elements

The string value sets the name of the category. Value is language- splitted (by |) to allow for multiple languages.

Description

Configuration of user defined links.

The string value sets the name of the category. Value is language- splitted (by |) to allow for multiple languages.

Description

If set, usage of deprecated Page TS Config properties is not logged to the deprecation log.

Default: 0

Description

If set, usage of deprecated Page TS Config properties is also logged to the BE log.

Default: 0

Description

An array of filenames containing vocabulary definitions inXML/RDF format.

Default: schemaOrg = EXT:rtehtmlarea/extensions/MicrodataSchema/res/schemaOrgAll.rdf