Essential Configuration

After completing the Azure Configuration, you need to configure the TYPO3 extension with the values obtained from Microsoft Entra ID.

Attention

The Client ID can be found on the overview page in Azure and should not be confused with the Client Secret ID. For the secret configuration, only the Secret value itself is required, not the Secret ID.

Quick Navigation

This page covers the complete configuration setup for the Exchange 365 TYPO3 extension:

Configuration Variables - Required environment variables and settings
Configuration Example - Complete configuration example with screenshot
Alternative Configuration Methods - Different ways to configure the extension
Testing the Configuration - How to verify your setup works
Security Considerations - Important security guidelines
Configuration Validation - Steps to validate your configuration

Configuration Variables

The extension reads its settings from $GLOBALS['TYPO3_CONF_VARS']['MAIL']. The keys are prefixed with transport_exchange365_ to avoid conflicts with other mail transports. These settings are used everywhere — backend, CLI, scheduler and, unless TypoScript overrides them, the frontend.

The steps below write them as environment variables named TYPO3_CONF_VARS__MAIL__…, which keeps every secret out of files that end up in version control.

Important

TYPO3 does not read TYPO3_CONF_VARS__… variables by itself. The double-underscore naming is a widespread convention, but the mapping onto $GLOBALS['TYPO3_CONF_VARS'] has to be done by your project — see Mapping TYPO3_CONF_VARS__… variables. If your project has no such mapping, use In TYPO3 configuration files, reading the environment instead.

Set the mail transport to Exchange365Transport.

Configure TYPO3 to use the Exchange 365 transport instead of the default SMTP transport.
```
TYPO3_CONF_VARS__MAIL__transport=OliverKroener\\OkExchange365\\Mail\\Transport\\Exchange365Transport
```
Copied!
Configure the Tenant ID.

Set the Tenant ID obtained from step 4 of the Azure Configuration.
```
TYPO3_CONF_VARS__MAIL__transport_exchange365_tenantId='your-tenant-id-here'
```
Copied!
Attention

Replace your-tenant-id-here with the actual Tenant ID from your Azure application overview page.
Configure the Client ID.

Set the Client ID (Application ID) obtained from step 4 of the Azure Configuration.
```
TYPO3_CONF_VARS__MAIL__transport_exchange365_clientId='your-client-id-here'
```
Copied!
Attention

Replace your-client-id-here with the actual Client ID from your Azure application overview page.
Configure the Client Secret.

Set the Client Secret value obtained from step 7 of the Azure Configuration.
```
TYPO3_CONF_VARS__MAIL__transport_exchange365_clientSecret='your-client-secret-here'
```
Copied!
Attention
- Replace your-client-secret-here with the actual Secret Value (not the Secret ID)
- This is sensitive information - keep it secure and never expose it in public repositories
Configure the sender email address.

Set the email address that will be used as the sender for all emails sent through this transport.
```
TYPO3_CONF_VARS__MAIL__transport_exchange365_fromEmail='service@your-domain.com'
```
Copied!
Attention

The email address will fall back to TYPO3's $GLOBALS['TYPO3_CONF_VARS']['MAIL']['defaultMailFromAddress'] if not specified here.
Note
- Replace service@your-domain.com with a valid email address from your organization (it must exist in your Exchange 365 environment as SharedMailbox or User Mailbox)
- This email address must exist in your Exchange 365 environment
- The application needs permission to send emails on behalf of this address
Configure the Graph sender user ID (optional).

Set the Microsoft Graph mailbox/user ID used for the API call. This is resolved separately from the message From address, so you can send as or on behalf of a different mailbox (Send As / Send On Behalf scenarios).
```
TYPO3_CONF_VARS__MAIL__transport_exchange365_graphSenderUserId='shared-mailbox@your-domain.com'
```
Copied!
Note
- Leave empty to fall back to the message From address, then to fromEmail, then to $GLOBALS['TYPO3_CONF_VARS']['MAIL']['defaultMailFromAddress']
- The mailbox must exist in your Exchange 365 environment and the Azure application must have Mail.Send permission for it
- This mailbox needs Send As or Send On Behalf on the visible sender mailbox. See Send mail from another user (Microsoft Graph).
Save to Sent Items (no effect on this version).

The 2.x line posts the raw MIME message to the Graph sendMail endpoint. In that mode, Microsoft Graph always saves a copy in the Sent Items folder of the mailbox the call is made through. transport_exchange365_saveToSentItems (default 0) is therefore ignored on this version, and the static template has no saveToSentItems constant.

Configuration Example

Here's a complete example of all required configuration variables:

TYPO3 configuration showing Exchange365 transport variables setup

Environment Variables (.env file)

You can configure these settings using a .env file in your TYPO3 root directory:

# Exchange 365 Mail Transport Configuration
TYPO3_CONF_VARS__MAIL__transport=OliverKroener\\OkExchange365\\Mail\\Transport\\Exchange365Transport
TYPO3_CONF_VARS__MAIL__transport_exchange365_tenantId='your-tenant-id-here'
TYPO3_CONF_VARS__MAIL__transport_exchange365_clientId='your-client-id-here'
TYPO3_CONF_VARS__MAIL__transport_exchange365_clientSecret='your-client-secret-here'
TYPO3_CONF_VARS__MAIL__transport_exchange365_fromEmail='service@your-domain.com'
# Optional: Send As / Send On Behalf (leave unset to use the message From)
#TYPO3_CONF_VARS__MAIL__transport_exchange365_graphSenderUserId='shared-mailbox@your-domain.com'

Alternative Configuration Methods

Mapping `TYPO3_CONF_VARS__…` variables

If your project does not already map TYPO3_CONF_VARS__… environment variables, add this loop. Double underscores become array levels, so TYPO3_CONF_VARS__MAIL__transport_exchange365_clientSecret ends up in $GLOBALS['TYPO3_CONF_VARS']['MAIL']['transport_exchange365_clientSecret'].

public/typo3conf/AdditionalConfiguration.php

<?php

// Variables loaded by a dotenv library live in $_ENV, variables set by the
// web server or container in getenv(). Read both.
foreach (array_merge(getenv(), $_ENV) as $name => $value) {
    if (!is_string($name) || strpos($name, 'TYPO3_CONF_VARS__') !== 0) {
        continue;
    }
    $target = &$GLOBALS['TYPO3_CONF_VARS'];
    foreach (explode('__', substr($name, strlen('TYPO3_CONF_VARS__'))) as $segment) {
        $target = &$target[$segment];
    }
    $target = $value;
    unset($target);
}

In TYPO3 configuration files, reading the environment

Without the mapping, set the values in public/typo3conf/AdditionalConfiguration.php and read the secrets from the environment there. Use your own variable names:

public/typo3conf/AdditionalConfiguration.php

<?php

$env = static function (string $name): string {
    return (string)(getenv($name) ?: ($_ENV[$name] ?? ''));
};

$GLOBALS['TYPO3_CONF_VARS']['MAIL']['transport'] = \OliverKroener\OkExchange365\Mail\Transport\Exchange365Transport::class;
$GLOBALS['TYPO3_CONF_VARS']['MAIL']['transport_exchange365_tenantId'] = $env('EXCHANGE365_TENANT_ID');
$GLOBALS['TYPO3_CONF_VARS']['MAIL']['transport_exchange365_clientId'] = $env('EXCHANGE365_CLIENT_ID');
$GLOBALS['TYPO3_CONF_VARS']['MAIL']['transport_exchange365_clientSecret'] = $env('EXCHANGE365_CLIENT_SECRET');
$GLOBALS['TYPO3_CONF_VARS']['MAIL']['transport_exchange365_fromEmail'] = 'service@your-domain.com';
// Optional: distinct Graph sender mailbox (Send As / Send On Behalf).
// $GLOBALS['TYPO3_CONF_VARS']['MAIL']['transport_exchange365_graphSenderUserId'] = 'account1@your-domain.com';

Warning

Do not write the client secret as a literal into LocalConfiguration.php or AdditionalConfiguration.php. TYPO3 rewrites LocalConfiguration.php when settings change in the backend, and both files typically end up in version control and backups.

Note

In the frontend, the same values can also come from TypoScript, where := getEnv(...) reads them from the environment. See Recommended: read the credentials from the environment.

Testing the Configuration

After configuring all variables, you can test the email functionality by:

Sending a test email through TYPO3's mail functionality
Checking the TYPO3 logs for any error messages
Verifying that emails are received at the intended recipients

Tip

Enable TYPO3's developer log to see detailed information about the email sending process and any potential issues with the Exchange 365 integration.

Security Considerations

Warning

Azure Credential Security

Store the clientSecret securely using environment variables or encrypted configuration
Never commit secrets to version control systems
Rotate client secrets regularly before expiration
Use different Azure applications for different environments (dev/staging/prod)
Monitor Azure sign-in logs for unauthorized access

Note

In System > Configuration, the extension masks the tenant ID, client ID and client secret held in TYPO3_CONF_VARS (via a hook of the lowlevel configuration module). Other places, such as TypoScript, are not masked.

Configuration Validation

To verify your configuration is correct:

Check in backend:
- Open Admin Tools > Environment > Test Mail Setup and send a test mail
- Ensure the transport is set to Exchange365Transport and all required fields are filled

Check TYPO3 configuration:

// In TYPO3 backend or debug context
\TYPO3\CMS\Core\Utility\DebugUtility::debug($GLOBALS['TYPO3_CONF_VARS']['MAIL']);

Test email sending:

// Test email functionality
$mail = \TYPO3\CMS\Core\Utility\GeneralUtility::makeInstance(\TYPO3\CMS\Core\Mail\MailMessage::class);
$mail->to('test@example.com')
    ->subject('Test Email')
    ->text('This is a test email from TYPO3.')
    ->send();

Check logs: Monitor TYPO3 logs for authentication or sending errors. A failed send throws a Symfony TransportException (a RuntimeException) whose message names the cause, for example Exchange 365 configuration missing required field: clientSecret.

Automated tests

This branch is covered by the cross-version test matrix that lives on the extension's main branch (make test-matrix / make test-matrix-live there). For TYPO3 v10 it runs the unit and functional tests, PHPStan and the coding standard check, sends real mail through Microsoft Graph from the CLI and from the frontend (credentials via := getEnv()), and checks in a headless browser that the credentials are masked in the backend.