TYPO3 v6 has reached its end-of-life April 18th, 2017 and is not maintained by the community anymore. Looking for a stable version? Use the version switch on the top left.

There is no further ELTS support. It is strongly recommended updating your project.


Cached Files in typo3temp/

Generally you should know that TYPO3 generates temporary "cached" files and PHP scripts in typo3temp/Cache/. You can remove the whole typo3temp/Cache directory at any time; the directory structure and all the caches will be re-written on the next hit to the system.

A shortcut to remove these caches can be found in the Install Tool, under "Important Actions". This might be handy in case some of your cache files is damaged and your system is not running correctly. The Install Tool won't load any of these caches or any extension, so it should be safe to use regardless of the corrupt state of the Caches.

Amongst other caches, under typo3temp/Cache/Code/cache_core/ you find files like these:

-rw-rw----   1 www-data   www-data   61555  2014-03-26 16:28   ext_localconf_8b0519db6112697cceedb50296df89b0ce04ff70.php
-rw-rw----   1 www-data   www-data   81995  2014-03-26 16:28   ext_tables_c3638687920118a92ab652cbf23a9ca69d4a6469.php

These files simply contain all ext_tables.php and ext_localconf.php files of the installed extensions concatenated in the order they are loaded. Therefore including one of these files would be the same as including potentially hundred PHP- files and that saves some milliseconds for the system.

Concerning these files you have to consider the following:

  1. Making changes to these files does not make sense, because they can be removed and recreated from the "originals" at any time. You should instead change the "originals".

  2. If you make changes to the original ext_tables.php or ext_localconf.php files in your extensions, you will have to clear the cached files away for your changes to take effect.

Possible Problems with the cached Files

Changing the absolute path to TYPO3

If you change the path of the TYPO3 installation, you might get a lot of errors like "Failed opening ..." or "Unable to access ...". The problem is that absolute file paths are hard-coded inside the cached files.

Fix: Clean the cache using the Install Tool: Go to "Important Actions" and use the "Clear all caches" function. Then hit the page again.

Changing Image processing Settings

When you change the settings for Image Processing (in normal mode), you must take into account that old images may still be in the typo3temp/ folder and that they prevent new files from being generated! This is especially important to know, if you are trying to set up image processing for the very first time.

The problem is solved by clearing the files in the typo3temp/ folder. Also make sure to clear the database table "cache_pages".